Sony HVL-F43M Operating Instructions Manual page 49

5
Press the Fn button to finish the setting.
6
Set the shutter speed and aperture.
• The shutter speed should at least equal the number of flashes (TIME)
divided by the flash frequency (Hz).
For example, if the number of flashes is 10 and the flash frequency is 5, set
the shutter speed of your camera to 2 seconds or more.
7
When the flash is fully charged, press the shutter
button to take the photo.
• The distance at which the proper exposure is obtained with a single flash is
displayed on the LCD panel.
• To prevent shaking, the use of a tripod is recommended during multiple
flash photography.
• Test flash will fire at the selected frequency/number/level while the TEST
button is being pressed if [TEST1] is selected in the custom setting. When
[TEST3] or [TESTM] is selected, the flash three times or the four second
modeling flash has priority.
49
GB