Sanyo SCP-8400 User Manual page 133

Making a Push 2 Talk Call by Entering a Number
To place a Push 2 Talk call by entering a number:
1.
From standby mode, enter the Push 2 Talk number you want to
dial.
2.
Press
to take the floor and speak.)
The contact's name appears on the display if there is a
matched number in your Push 2 Talk List.
3.
Continue with the Push 2 Talk call, pressing and holding
to speak and releasing it to allow the other party to reply.
4.
When the call is finished, press
– or –
1.
Press
2. Press Go to (left softkey), select Enter P2T#.
3.
Enter the Push 2 Talk number you want to dial.
4.
Follow steps 2-4 above.
Note:
Push 2 Talk numbers must contain ten digits (phone number). Your Push 2
Talk number is the same as your phone number.
12. Push 2 Talk
to place the Push 2 Talk call. (Continue holding
.
.
127