Epson TM-T88IV Technical Reference Manual page 88

11. Customized value
12. Number of head energizing
13. Low power consumption
mode
14. UB series interface support
15. Limitation of the function
when UB series interface
support
D-2 TM-T88IV/TM-88III Comparison Table
TM-T88IV
The customized value can be set with
the command and Memory switch
setting utility.
• Print density
• Print speed
• Number of head energizing
• Print control (signal or two color)
• Print density level of the black color
in two-color printing
One-/two-/four- enegizing can be
selected
Depending on the condition of the
command or the print duty, the
printer controls the print speed or the
number of the head energizing, in
order to save the power.
UB-U05, U06, U19 can be used.
(These are USB interface)
A buzzer function cannot be
operated on the UB series interface
that supports the buzzer function.
TM-T88III
----
Fixed to two-energizing
The print speed is limitted to 70 mm/s
maximum to save the power.
The UB series interfacelisted in left
column cannot be used.
A buzzer function can be operated.
Rev. A