3. Pull out the roll paper toward you, then close the printer cover.
4. Tear off the leading edge of the roll paper using the manual cutter.
1.4.1.2 Replacing Paper
Follow the procedure below to replace roll paper.
1. Open the printer cover, and remove the core of the previously used roll paper.
2. Insert the new roll paper following the procedure in "Installing Roll Paper" (page 1-6).
1.4.2 Removing Jammed Paper
CAUTION:
Do not touch the thermal head because it can be very hot after printing.
For handling the thermal head, refer to "Cleaning the Thermal Head" (page 1-8).
1. Turn the printer off and press the cover open button.
2. Remove jammed paper, reinstall the roll, and close the cover.
Rev. A
Figure 1-6 Closing the printer cover
Figure 1-7 Tear off paper
TM-T88IV Technical Reference Guide
Product Overview 1-7