1. Manuals
  2. Brands
  3. Cross Technologies Manuals
  4. Switch
  5. 1582-71
  6. Instruction manual

Cross Technologies 1582-71 Instruction Manual

Rf switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Instruction Manual

SWITCH A
AUTO
CH 1
CH 2
MAN
ALM
ON-
MANUAL
ON-
ALM
REM
RESET
LINE
SELECT
LINE
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
SWITCH
AUTO
CH 1
CH 2
MAN
ALM
ON-
MANUAL
ON-
ALM
REM
RESET
LINE
SELECT
LINE
SWITCH B
AUTO
CH 1
CH 2
MAN
ALM
ON-
MANUAL
ON-
ALM
REM
RESET
LINE
SELECT
LINE
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 1582-71/72
MODEL 1582
SWITCH
1
2
POWER
MODEL 1582
SWITCH
1
2
POWER
RF Switch
June 2011 Rev. C
CROSS TECHNOLOGIES, INC.
CROSS TECHNOLOGIES, INC.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1582-71 and is the answer not in the manual?

Questions and answers

Related Manuals for Cross Technologies 1582-71

Summary of Contents for Cross Technologies 1582-71

  • Page 1: Instruction Manual

    LINE Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.

  • Page 2: Table Of Contents

    WARRANTY - The following warranty applies to all Cross Technologies, Inc. products. All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies.

  • Page 3: General

    1.0 General 1.1 Equipment Description The 1582-71 provides Auto, Manual or Remote relay switching between CH1 and CH2 RF signals. Alarm conditions on CH1 and CH2 are either a contact closure to ground or an open (selectable). The logic controls two separate RF switches, X and Y.

  • Page 4: Front Panel

    POWER LINE SELECT LINE LINE SELECT LINE 1582-72 FRONT PANEL REAR PANEL FIGURE 1.1 Model 1582-71/72 Front and Rear Panels SWITCH B1 (RF) SWITCH B SWITCH B2 (RF) SWITCHED RF SWITCH A1 (RF) SWITCH A SWITCH A2 (RF) SWITCHED RF...

  • Page 5: Technical Characteristics

    1.2 Technical Characteristics TABLE 1.1 1582-71/72 RF Switch Specifications* Switch Characteristics Impedance 75 , 50 optional Type Relay Isolation > 65 dB, DC to 10 MHz > 50 dB, to 1.0 GHz > 40 dB, to 1.5 GHz Switch Time...

  • Page 6: Installation

    It is housed in a 1 RU (1.75 inch high) by 12 inch deep chassis. Redundant switching power supplies provide power for the assembly. The 1582-71/72 can be secured to a rack using the 4 holes on the front panel.

  • Page 7: Input And Output Signals

    100-240 ±10% VAC, 47-60 Hz. for switches A&B. for switches A&B. See Table See Table 2.2. 2.2. FIGURE 2.2 1582-71/72 RF Switch Rear Panel Inputs/Outputs Table 2.1 J7 Pinouts (Monitors and Controls) Table 2.1 J7 P P inouts Pinouts (Monitors and Function...

  • Page 8: Controls And Indicators

    SWITCH B AUTO AUTO CH 2 CH 2 CH 1 CH 1 RESET RESET POWER MANUAL MANUAL LINE LINE LINE LINE SELECT SELECT 1582-72 Front Panel FIGURE 2.3 1582-71/72 Front Panel Controls and Indicators 1582-71/72 Manual, Rev. C Page 8 06/23/11...
  • Page 9 RESET pin on J7, and then it switches to channel 1. (If channel 1 alarms are cleared ). If in the ICS mode and originally set to CH2 the 1582-71 will not switch if CH2 alarms.

  • Page 10: Operation

    S4 positions 1,2,3,4 to OFF - ICS disabled (Minimum Auto switching, Return to Last State Mode) The 1582-71 goes to the last state (CH1 or CH2) it was in when in AUTO after manually or remotely switching and returning to AUTO. Auto switching occurs only if current channel alarms and the other channel is clear.

  • Page 11: Switch Mode Setup

    Auto switching occurs only if current channel alarms and the other channel is clear. Non-dot - JP4; Dot - JP1, JP2, JP3; S4 - ALL TO ON. Factory set mode is generally 1) CH1 Prime Mode. 1582-71/72 Manual, Rev. C Page 11 06/23/11...
  • Page 12 G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 1582-71/72 Manual, Rev. C Page 12 06/23/11...

  • Page 13: Shiloh Road Alpharetta, Georgia

    ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 1582-71/72 Manual, Rev. C Page 13 06/23/11...

This manual is also suitable for:

1582-72

Table of Contents