Installing The Kickstarter Lever - Yamaha YZ125 2022 Owner's Service Manual

5. Install:
• Crankcase cover (right) "1"
TIP
Mesh the governor gear "2", and impeller shaft
gear "3" with primary drive gear "4".
6. Install:
• Crankcase cover screw (right) "1"
Crankcase cover screw (right)
10 N·m (1.0 kgf·m, 7.4 lb·ft)
TIP
Tighten the screws in stage, using a crisscross
pattern.
EAM30572

INSTALLING THE KICKSTARTER LEVER

1. Install:
• Kickstarter lever "1"
• Washer "2"
• Kickstarter lever bolt "3"
Kickstarter lever
10 N·m (1.0 kgf·m, 7.4 lb·ft)
TIP
Install the kickstarter closest to but not contact-
ing the pillar tube "4".
2. Install:
• Shift pedal "1"
• Shift pedal bolt "2"
Shift pedal bolt
12 N·m (1.2 kgf·m, 8.9 lb·ft)
TIP
Align the upper line "a" of the shift pedal with the
center "b" of the crankcase projection and rotate
the shift pedal counterclockwise until it first en-
gages. Then install the shift pedal.
5-24
KICKSTARTER