Biketec AG Flyer Operating Manual page 9

23.2.1 Standard brake levers - 59
23.3 Hub brakes - 60
23.3.1 Roller brakes - 60
23.4 Rim brakes (V-brakes) - 61
23.4.1 Adjusting brakes - 61
23.4.2 Setting the distance of the brake pad
to the rim - 61
23.4.3 Brake pad wear - 62
23.4.4 Hydraulic rim brakes - 62
23.5 Disc brakes - 63
23.5.1 Hydraulic disc brakes - 63
23.5.2 Formation of vapour bubbles - 64
23.5.3 Cleaning the brakes - 64
23.5.4 Fitting/removing wheels - 65
24. Lighting systems - 65
24.1 Lighting system regulations - 65
24.2 Dynamo - 66
24.2.1 Hub dynamo - 66
24.3 Failure of the lighting system - 66
25. Additional parts - 67
25.1 Luggage rack - 67
25.1.1 Front wheel rack - 68
25.1.2 Rear luggage rack - 68
25.2 Mudguard - 68
25.2.1 Re-locking a safety release - 69
26. Accessories and equipment - 69
26.1 Child seat - 69
26.2 Kickstand - 71
26.3 Bike trailer - 71
26.4 Basket - 71
26.5 Bar ends - 72
27. Car roof rack and rear carrier - 72
28. Carbon components - 73
28.1 Properties - 73
28.2 Torques - 73
28.3 Visual checks - 73
28.4 Carbon frame - 73
28.5 Danger of injury from splinters - 74
28.6 Attaching to assembly stands - 74
28.7 Car transport - 74
29. Servicing and caring for your pedelec - 74
29.1 Care - 74
29.2 Parts subject to wear - 75
29.3 Tyres - 75
29.4 Rims in connection with rim brakes - 75
29.5 Brake pads - 75
29.6 Brake discs - 76
29.7 Bicycle chain or drive belt - 76
29.8 Chain wheels, sprockets and jockey
wheels - 76
29.9 Lighting elements in the lighting
system - 76
29.10 Handlebar grips - 76
29.11 Hydraulic oils and lubricants - 76
29.12 Gear and brake cables - 76
29.13 Paintwork - 76
29.14 Bearings - 76
29.15 Plain bearings and bearings in full-
suspension frames, suspension forks
and other suspension parts - 77
Regular inspections - 77
30.
30.1 Inspection plan - 77
30.1.1 Servicing/checks - 77
List of links - 79
31.
32. Exchanging components on the "Speed
FLYER" - 79
32.1 Parts which may only be replaced with
approved parts - 79
32.2 Replacement tyres - 79
32.3 Components which do not have to
be replaced with approved replace-
ments - 80
33. Technical information - 81
33.1 Permitted overall weight - 81
33.2 Permitted load of the luggage rack - 81
33.3 Torques for screwed connections - 81
33.3.1 General torques for screwed con-
nections - 82
33.4 Tyres and tyre pressure - 83
33.5 Lighting system - 83
34. Warranty and
guarantee conditions - 85
34.1 Prerequisites for a warranty or guar-
antee claim - 85
34.2 Exclusions from warranty and guar-
antee - 85
Handover documentation - C5
VI.
VII. Bicycle pass - C6
5