Biketec AG Flyer Operating Manual page 54

50 Dealing with a flat tyre
Attach the cable to the pulley as shown in the
diagram. Pull the cable through the slot in the
cassette joint bracket and plug the end of the ca-
ble casing securely into the cable casing holder.
Shifter cable
Cassette joint pulley
Bracket
Holder
Cable casing holder
C J
- 8 S
2 0
J A
P A
N
Slot
1
Pass through
the slot
You can make this work easier for yourself by
first inserting the cable casing into the cable
casing holder, then sticking a 2 mm allen key
or a spoke into the hole in the pulley and turn-
ing the pulley in order to fit the cable fasten-
ing screw correctly in the open side.
Guide
Insert into
the cable
casing holder
2
Turn pulley
CJ-8S20 CJ-8S20
JAPAN JAPAN
Guide
Correct Incorrect
Check if the cable is correctly
inserted in the pulley guides.
1
3
Insert into cable
Insert cable
casing holder
attachment
screw
CJ-8S20
JAPAN
2
Pulley hole
2 mm allen key or #14 spoke
Source: Shimano techdocs
®
You should only take part in pub-
lic road traffic after first taking
your bike for a test ride and test-
ing your hub gear system.