Step By Step "How To; How To Pull A Stream From An Internet Radio Station - BARIX Streaming Client User Manual

Streaming client, network audio decoder firmware for wma and mp3 streaming (http, udp, rtp) with automatic failover and usb playback, supports: exstreamer, exstreamer 100, exstreamer 200, ip audio module, ip audio module 200
Table of Contents

Advertisement

5 Step by step "How To"

5.1 How to pull a stream from an Internet radio station

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
User Manual "Streaming Client" - V1.31 - 8. Jan. 2007
As a company based in Switzerland we are happy to bring
you modern Swiss music with this configuration example.
We assume that you have connected the device to your
network switch or hub which is linked to the Internet.
Open your Web Browser
Enter the IP address of the Barix device (as announced
over the audio outputs by SonicIP) and press Enter.
Example: 192.168.0.12
Look at the section NETWORK SETTINGS.
If the IP Address is set to 0.0.0.0 (Automatic discovery)
you can proceed to step 6 further below.
Enter the Gateway IP address
Example: 192.168.0.1
Enter the primary DNS IP address
Example: 192.168.0.1
Scroll to the section STREAMING SETTINGS.
In the "1. URL" field enter the following:
mms://dms-cl-017.skypro.tv/virus
Select "2s" for two seconds in the "Buffer" selection.
Click on "APPLY" button at the end of the page. The
device will restart, and after some seconds you will hear
the Swiss national radio channel "VIRUS".
Here the complete list of the national channels
(We are a very small country so only 4 channels):
DRS 1
mms://dms-cl-017.skypro.tv/drs1
DRS 2
mms://dms-cl-017.skypro.tv/drs2
DRS 3
mms://dms-cl-017.skypro.tv/drs3
DRS Virus
mms://dms-cl-017.skypro.tv/virus
Step by step "How To"
39

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Streaming Client and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents