Dhcp Host Name; Web Server Port; Http Proxy Url - BARIX Streaming Client User Manual

DHCP Host Name

Web Server Port

HTTP Proxy URL

User Manual "Streaming Client" - V1.31 - 8. Jan. 2007
Name of the device sent in
name based on the device's
generated. Enter up to 15 Characters.
Note: This can help the administration of multiple
devices when a descriptive DHCP Host Name is given
and the DHCP server can list the attached devices as
shown in the picture below (see entry #2).
The port of the internal Web Server can be adjusted. If
set to zero the default port 80 is used. When changing
configuration parameters remotely is desired but a web
server using port 80 is already installed in the LAN you
can change the Web Server Port of the Barix device to a
different port (e.g. 8080).
Attention: During an update using a web browser this
port has to be set to 0 (see chapter
The HTTP Proxy Server is a server that acts as a broker
between the Web browser and the HTTP Server. It is
used on many networks, as it can provide caching and/or
content filtering. On such networks, connecting to the
Internet is usually restricted to the HTTP protocol via
HTTP Proxy server.
The Barix Exstreamer can use an Internet connection
served by the HTTP Proxy for streaming from HTTP
sources, for automatic configuration, firmware update
and for MTELL monitoring. Streaming of protocols other
than HTTP is not supported by the HTTP proxy.
DHCP request. If not set, a
MAC address is automatically
4.3 Web Update
Device Configuration
)!
17