BARIX Streaming Client User Manual page 38

User Manual "Streaming Client" - V1.31 - 8. Jan. 2007
The following screen appears:
STEP 9
After the device has rebooted click on the "here" link to
reload the main page.
The device is now ready for configuration according to
your needs (see chapter 3 Device Configuration ).
Note: The "Web Update" procedure does not change
the current configuration. Barix recommends
nevertheless checking for correct parameters in the
configuration as well as to set parameters for newly
added features.
If you observe strange behavior after an update Barix
recommends resetting the configuration to factory
defaults by keeping the Reset button pressed until the
red LED starts blinking (approx. 10 seconds) and to start
over with the configuration of the device.
38 Updating the Firmware