Serial Rescue; Web Update - BARIX Streaming Client User Manual

User Manual "Streaming Client" - V1.31 - 8. Jan. 2007

4.2 Serial Rescue

4.3 Web Update

34 Updating the Firmware
The "Serial Rescue" procedure loads the entire firmware
and resets the device to factory default settings (current
configuration is overwritten).
It is therefore helpful to note the current setting. Printing
out the "status" page is the quickest way as the page
contains all configuration parameters.
Open your web browser and type in the IP address of
the Barix device in the URL field followed by "/status"
and hit the "Enter" key.
• Example: "192.168.0.12/status"
To apply the Rescue using the supplied serial cross cable
and a PC running Windows 2000, Windows XP or Linux.
Follow the steps in the "_readme1st.txt" carefully as
there are several different applications (batch files) to be
started depending on the Barix hardware (new or legacy)
and the PCs COM port number used.
Calculate approximately 2 minutes to complete the
"Serial Rescue" procedure. After a successful rescue the
device is ready for configuration according to your needs
(see chapter 3 Device Configuration
To apply the "Web Update" procedure you will need a
standard web browser and the IP address of the device
(announced by the SonicIP feature).
Make sure that the "Web server port" is set to "80"
before starting the procedure.
Calculate approximately 2 minutes to complete the
"Web Update" procedure.
STEP 1
Open your web browser
).