Table of Contents
Advertisement
Record key does not start recording
•
Make sure there is a recordable (DVD+RW, DVD+R, DVD-R or DVD-RW) disc inside the recorder.
•
If you wish to record from RF input, check the program table to see the available channels. You may
need to do an APS (Automatic program search) again to record, if the automatic search after installation
has failed to find channels.
•
If you wish to record from the SCART, CVBS, S-Video source, make sure that the record source is active
and sending signals.
•
To record from a DVD player the DVD should not be copy protected.
•
If there is no space left on the disc you will see the error message "disc is full." Erase some titles to
create space for new recordings.
Switch to a source, but there is no signal
•
Make sure the antenna is connected to RF input and there is TV broadcast on some channels.
•
If you are using scart, CVBS, S-Video inputs, make sure the record source is properly connected and
switched on.
Timer recording does not work
•
Make sure that the system time and record start time are set correctly.
Time will be displayed when the recorder switches to standby in power saving off mode.
•
Make sure that the program number of the scheduled record is on the program list.
You will not be able to record, if the program number found during APS does not contain an active channel.
Edit disc option is disabled
•
Make sure that the recorder is in "full stop mode".
Your country doesn't exist in "Country Selection" list in setup menu.
•
Select "Other" option.
Audio is not proper in tuner mode.
•
Make sure right country is selected before APS or manual search.
•
Make sure right audio standard is set for related program in Modify Channel menu.
•
Change Standard option manually if needed
If nothing works
•
If you have tried the above solutions and nothing seems to work, try switching your DVD off and on
again. If this does not work, contact your supplier or your initiating service. Never attempt to repair a
defective DVD recorder yourself.
NOTE: Please note that you may experience compatibility problems during playback or editing of the discs
that are recorded on other DVD Recorder Brands.
Cut this information box out and
keep in a safe place.
If You Forget The Password:
Press 3, 3, 0, 8.
Then please set your personal password.
44
Advertisement
Table of Contents
