Table of Contents
Advertisement
2.3.2 VIDEO
2.3.2.1 TV Type
MULTI: Select this option if your TV supports both NTSC and PAL.
PAL: Select this option if your TV supports only PAL.
NTSC: Select this option if your TV supports only NTSC.
2.3.2.2 TV Display
TV Display controls the presentation of the picture on the screen.
4:3 PS
4:3 LB
16:9 WS
4:3 PS: (Normal/PS Pan & Scan)
Allows the movie to fill the entire screen of your TV, but not the right and left edges.
4:3 LB: (Normal/LB Letterbox (4x3))
Allows you to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will
occupy a smaller portion of the screen.
16:9 WS: (Wide Widescreen (16x9))
Choose this setting if your DVD recorder is connected to a widescreen TV.
NOTE: Depending on the format of the DVD disc, e.g. 2.35:1 the picture may still have black lines above and
below the picture.
2.3.2.3 Video Output Format
This menu item enables user to select video output as either "Progressive" or "Interlaced".
When progressive option is selected, a confirmation message will be displayed. If user does not press any
key to confirm, selection will be discarded after a while.
NOTE: You can only get progressive output with progressive TV set, otherwise you will not get video
properly.
If your selection and the TV set do not match please use the shortcuts below in monitor mode:
CLEAR, CLEAR, 5: Switch to progressive
CLEAR, CLEAR, 6: Switch to interlaced
2.3.3 AUDIO
2.3.3.1 Downmix
Downmix means mixing 5.1 channels down to two channels. Set
these options to agree with the speakers installed in your home
entertainment system.
Stereo: Two channels stereo. Use this option if you have a stereo
TV or a HI-FI stereo system.
Surround: Surround encoded output.
22
Advertisement
Table of Contents
