How To Check, Change Or Delete A Programmed Recording (Timer); Playback; Disc Playback; Preparing For Playback (All Discs) - TECHWOOD DVDR R-520 BLACK 80GB User Manual

3.5.3 How To Check, Change or Delete A Programmed Recording (Timer)?

•
Switch on the TV set.
•
Press TIMER key on the remote control or select Timer
Setting Menu from Setup menu.
•
In order to change any parameter of the programmed
recording item, choose the related record item, press
SELECT key. On the displayed popup menu, you can
change any fields.
•
To delete the programmed recording item, after steps 1 and
2, go on the item you want to delete on the list and press
CLEAR key; related item will be deleted from the list.
The standard maximum number of Timer recordings will be 20.
NOTE: If a recording is continuing onto harddisk (time shifting), 3 minutes before timer recording you will be
asked to confirm timer recording. If you do not respond within 1 minute, then Timer recording will start
automatically. If you are recording onto DVD, then 3 minutes before timer recording you will be notified that
you need to stop the current recording in order to allow timer recording. The message will appear for 10
seconds and be removed automatically. If you do not stop the current recording, then the timer recording will
be ignored.
NOTE: If Timer recording is onto harddisk, you can view the title being recorded in time shifting mode
(Pause/Play/..). Save operation will be disabled.

4. PLAYBACK

4.1 DISC PLAYBACK

4.1.1 Preparing For Playback (All Discs)

Ø To playback a disc, turn on the TV.
Ø If the DVD Recorder audio outputs are connected to an A/V receiver, turn on the receiver and make the
appropriate selections to play audio from the DVD Recorder. Otherwise connect audio output to TV
input.
Ø Set options in the setup menus that are appropriate for your speaker arrangement and configuration, for
the video standard (PAL or NTSC) of your television monitor, and for the video picture aspect ratio.
Ø For a DVD, check packaging and determine whether the parental control level and local setups are
appropriate for your country. Refer to setup menus for the Country and Parental controls.
Ø DVDs are encoded for six different regions. Check that the region designated on the DVD packaging
conforms to your region. You cannot make any changes in the setup menu that will effect the region
encoding.

4.1.2 Inserting a Disc In The Tray

Insert a disc in the DVD Recorder tray with the shiny side down. NOTE that some discs shine more than
others. In the case of commercial CD's, the disc identifying information is printed on the "top" side of a disc.
Do not insert more than one disc in the disc tray at a time.
NOTE: If the disc is placed in upside down (and it is a single sided disc), the VFD display on the DVD
recorder will indicate NO DISC.

4.1.3 Basic Playback (DVD, (S)VCD, CD-DA, MP3/WMA, JPEG, MPEG, DivX)

Some playback operations and interactivity features of DVD and may be intentionally fixed by the software
producer. Accordingly, some playback features may not be available. You should refer to the instructions
supplied with the DVD. The simplest way to playback a disc is to follow this procedure.
1. Press on the STANDBY key.
2. Press OPEN/CLOSE to open the disc tray.
3. Place a disc onto the tray.
4. Press OPEN/CLOSE.
The disc tray is automatically closed and play commences.
DVD: A menu may appear on the TV screen after a moment or the film may start immediately after the
introduction of the movie company. You can select a specific scene to play if provided in this menu. This
behavior depends on the disc content and may change.
33