Table of Contents
Advertisement
2.3.6.3 Factory Defaults
When you choose Factory Defaults option, after resetting all your Setup options back to factory settings, the
device will switch to standby mode automatically. When the standby button is pressed to switch the device
on, first time installation starts.
CAUTION: Parental level and parental password do not change.
2.3.6.4 Power Saving
If Power Saving is selected as "On", the unit goes into LOW POWER state instead of normal STANDBY
state when you press STANDBY key on remote controller or front panel.
In LOW POWER state, the time is not displayed on VFD and only STANDBY key works on remote controller
or front panel.
If Power Saving is selected as "Off", the unit always goes into normal STANDBY state on each press of
STANDBY key.
NOTE: At low power mode the ventilator does not work at stand by.
2.3.6.5 AV-2
2.3.6.6 DIVX (R) VOD
This menu option allows you to watch DivX DRM (Digital Rights
Management) supported discs. When you select this option, you will be
given a DivX registration code. According to the information on the
screen you will be able to watch DivX DRM discs.
2.3.7 HDD
2.3.7.1 Time Shift Buffer Mode
This option is used for whether storing time shifting data or not. If time shifting buffer option is selected as
"Refresh", buffer information will be lost and time shifting will be started from beginning when you change the
channel or video source.
If "Preserve" is selected, buffer information will be maintained during channel or source navigation.
2.3.7.2 Harddisk Info
When you press Show button on this menu, a new pop-up menu is
appeared; title number, total hard disk size, used and remain
space in hard disk information is shown as Mega Bytes.
This menu option allows you to set AV-2 as "Decoder", "SCART CVBS"
or "SCART RGB" output.
When "Decoder" option is selected, "SCART" is removed from the
available video sources list and an additional menu item ("Decoder
On/Off") is added into "Modify Channel" menu.
In the "Modify Channel" menu, if you select Decoder option as "On",
you can watch scrambled channels with appropriate decoder.
Otherwise, when "SCART CVBS" or "SCART RGB" is selected, AV-2
continues to stay in available sources list.
25
Advertisement
Table of Contents
