Erase Harddisk; Recording; Recording Setup; Record Quality - TECHWOOD DVDR R-520 BLACK 80GB User Manual

2.3.7.3 Erase Harddisk

This option is used for erasing all titles on harddisk. A warning message asking whether you want to erase or
not will be displayed. Select Yes to start erasing hard disk, or select No to return to the Setup menu. After
erase operation, the device will switch to standby mode automatically.
NOTE: You have to proceed with caution because this operation is irreversible.
NOTE: After erasing harddisk the recorder will switch to low power mode by first pressing standby
key, please press standby key again to open the recorder

3. RECORDING

3.1 RECORDING SETUP

3.1.1 Record Quality

You can select from up to five record quality settings to define the picture quality of the recordings and the
amount of space you want to use on the HDD. Higher quality recordings will consume more space and low
quality recordings will consume less space on the HDD.
You can also change record qualities by pressing RECORD MODE key on the remote control in monitor
mode without time shift.
Record Quality
HQ (High Quality)
SP (Standard Play)
LP(Long Play)
EP (Extended Play)
SLP (Super Long Play)
NOTE: During time shifting, record quality changes can not be refreshed unless you switch between monitor
mode with and without time shift.

3.1.2 Source Selection

Video input source modes: TV Tuner, SCART, Front CVBS, Front S-Video . Please checkout your setup first
and assemble the correct configurations for starting record process. In order to navigate between video
sources press VIDEO SOURCE key on the remote control.
If you press VIDEO SOURCE key on remote control in HDD mode or select TV/Video item from Functions
menu, it will switch to time shift monitor mode. In this mode you can record only to hard disk.

3.1.3 OTR (One Touch Recording)

Every press of RECORD/DUB key will increase recording time for 30 minutes after recording has been
started.
The timer list is circular. According to the record quality and the empty space available on the disc/harddisk;
after reaching to the maximum recording time, it switches back to OTR cancelled mode.

3.1.4 How To Watch Another Channel At TV During Recording?

This feature is valid only for SCART connection to TV. Press TV/DVD key on remote control. This will disable
the SCART output of the unit. By using your TV remote control, you can navigate through channels that are
registered on your TV and watch those channels. In order to enable the SCART output of the DVD recorder,
press TV/DVD key again.
Recording Time (4.7GB,DVD) Recording Time (80 GB, HDD)
~ 1 Hour
~ 2 Hours
~ 3 Hours
~ 4 Hours
~ 6 Hours
.
~ 18 Hours
~ 36 Hours
~ 50 Hours
~ 70 Hours
~ 104 Hours
26