For The Electrician - Ice-O-Matic MFI Service And Installation Manual

MFI Series
Electrical Connections:
Check the ice machine nameplate (located on the back panel) for the voltage requirements, and minimum
circuit ampacity. The ice machine requires a solid chassis to earth ground.
Connect the ice machine to its own electrical circuit so it is individually fused. Voltage variation must remain
within the limitations, even under starting conditions.
Note: All external wiring must conform to national, state and local electrical codes.
The use of a licensed electrician is required to perform the electrical installation.
Water Cooled Models
Electrical Inlet
Page 7

For the Electrician

Power
Supply
Air Cooled Models