Preparing The Monitor For Wall-Mounting - Lenovo LT2423wC User Manual

Preparing the monitor for wall-mounting

WARNING: To reduce the risk of personal injury or of damage to the equipment, check
that the wall-mounting fixture is adequately installed and secured before attaching the
monitor. Refer to the instructions supplied with the wall-mounting fixture and check
that it is capable of supporting the monitor.
1. Disconnect the power cable and any other cables from the monitor.
2. Place the monitor face down on a flat, protected surface.
3. Remove the monitor base from stand.
4. Remove the three screws in the monitor stand. Lift the monitor stand off the monitor.
5. Four threaded holes are exposed. These holes are for screws to attach the swing arm
or other mounting fixture to the back of the monitor.
6. Follow the instructions included with the mounting fixture to ensure that the
monitor is safely attached.
7. Attach a swing arm or other mounting fixture.
NOTE: For use only with UL(expand UL) Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 3.7 kg.
2-8
Flat Panel Monitor User's Guide