Installation Overview; Pre-Installation; Bypass Valve Installation - Pelican PSE1800 Owner's Manual

Pelican PSE1800/PSE2000 Premium Whole House Water Filter
& Salt Free Water Softener/Conditioner Combo

Installation Overview

Wall
Incoming
Water
Supply
Figure 1

Pre-Installation

Bypass Valve Installation

Figure 2
The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick
Connect Nuts. Push the Bypass Valve into the head of both the Pelican Whole House Water Filter and Salt
Free Water Softener/Conditioner with the unthreaded ends oriented toward the tanks and hand-tighten
the Quick Connect Nuts.
Notice:
The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may
result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass
valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to
match the drawing, and push them back down onto the stem.
© 2013 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Pre-Filter
Whole House Water Filter
Red Arrow
Quick Connect Nut
Water Filter Head
Whole House
Water Filter
PSE1800-2000 Rev M
Wall
Outgoing
Water
To House
Salt Free Water
Softener/Conditioner
www.pelicanwater.com
(877) 842-1635
Page 6