Connecting A Vcr Or Similar Device; Connecting To The Line In 1 Or 3 Jacks - Sony RDR-HX730 Operating Instructions Manual

Connecting a VCR or Similar Device

After disconnecting the recorder's AC power cord from the AC outlet, connect a VCR or
similar recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 75).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from connected equipment without a timer" on
page 51.

Connecting to the LINE IN 1 or 3 jacks

Connect a VCR or similar recording device to the LINE IN 1 or 3 of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
Audio/video cord
(not supplied)
to LINE IN 1 or 3
26
OUTPUT
AUDIO VIDEO
R L
: Signal flow
VCR, etc.
S VIDEO
S-video cord
(not supplied)
DVD recorder