Recording Tv Programs Using The Vcr Plus+ System - Sony RDR-HX730 Operating Instructions Manual

To extend the recording duration time
while recording
1
Press OPTIONS during recording to
select "Extend Rec Time," and press
ENTER.
2
Press M/m to select the duration time.
You can set the duration in increments of
10 minutes, for a maximum of 60
minutes.
3
Select "OK" and press ENTER.
z Hint
If you are recording to the HDD or a DVD-RW (VR
mode) at a recording mode that is SP or lower and
is a 2x speed or higher disc, you can play the title as
it is being recorded by selecting the program title on
the Title List (page 57).
b
Notes
• If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (HDD/DVD+RW/DVD-
RW only) (page 64).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite program, turn on the satellite
tuner and select the satellite program you want to
record. Leave the satellite tuner turned on until
the recorder finishes recording. If you connect
equipment with a timer function, you can use the
Synchro Rec function (page 50).
• Even if the timer is set for the same daily or
weekly program, the timer recording cannot be
made if it overlaps with a program that has
priority. " " will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• The Rec Mode Adjust function only works with a
timer recording. It does not function with Quick
Timer or Synchro Rec. In addition, the Rec Mode
Adjust function does not work when recording to
the HDD while "Auto Title Erase" of the "Timer
Settings" is set to "On" in the "Recording" setup.
44
Recording TV programs using
the VCR Plus+ system
The VCR Plus+ system is a feature that
simplifies setting the timer. Just enter the
PlusCode programming number listed in the
TV program guide. The date, time, and
channel of that program are set automatically.
Before you start, check that the TV and guide
channels are correctly set in "Set VCR Plus+
Channels" in the "Basic" setup (page 81).
Number
buttons
z REC
x REC
STOP
1
Press TIMER.
2
Select "PlusCode No." using M/m,
and press ENTER.
TIMER
</M/m/,,
ENTER