Step 6: Easy Setup - Sony RDR-HX730 Operating Instructions Manual

Step 6: Easy Setup

Make the basic adjustments by following the
on-screen instructions in "Easy Setup."
O RETURN
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The initial settings message appears.
• If this message does not appear, select
"Easy Setup" from "SETUP" in the
System Menu ("Settings and
Adjustments" on page 80).
2
Press ENTER.
Follow the on-screen instructions to
make the following settings.
Easy Setup - OSD
Select a language for the on-screen
displays.
Easy Setup - Clock
Select "Manual" and set the clock using
</M/m/,, then press ENTER. The
day of the week is set automatically.
If you used antenna hookup C (page 15),
you can select "Auto." The recorder will
automatically search for a channel that
carries a time signal when you turn off
the recorder after finishing Easy Setup.
Select whether or not you have a cable
connection.
The Tuner Preset function automatically
searches for all of the receivable channels
and presets them.
To set the channels manually, see
page 80.
[/1
If you have a wide-screen TV, select
"16:9." If you have a standard TV, select
either "4:3 Letter Box" (shrink to fit) or
"4:3 Pan Scan" (stretch to fit). This will
determine how "wide-screen" images are
displayed on your TV.
</M/m/,,
ENTER
If you connected an AV amplifier
(receiver) using either a digital optical or
coaxial cord, select "Yes : DIGITAL
OUT" and set the digital output signal
(page 85).
3
Press ENTER when "Finish" appears.
TV [/1
"Easy Setup" is finished.
To return to the previous step
Press O RETURN.
z Hint
If you want to run "Easy Setup" again, select "Easy
Setup" from "SETUP" in the System Menu
(page 91).
b
Notes
• If you use an S-video cord to connect your cable
box or satellite receiver, set "Line1 Input" or
"Line3 Input" of the "Line Input" to "S Video" in
the "Video" setup (page 84).
• If there are only a few channels in your area that
carry time signals, setting the clock automatically
may take up to about 20 minutes after the recorder
turns off. If nothing happens even after you wait
about 20 minutes, set the clock manually in
"Clock" of "Basic" (page 81).
Easy Setup - Tuner Preset
Easy Setup - TV Type (page 83)
Easy Setup - Audio Connection
23