KTM 990 ADVENTURE 2007 Owner's Manual page 80

»
MAINTENANCE WORK ON CHASSIS AND ENGINE
79
Carefully pull the oil screen [7] out of the oil tank.
Thoroughly clean the drain plugs, the cover and both oil screens. Clean all rubber seal rings
and check for damage. Replace if necessary.
7
Mount the oil drain plug on the engine with a new seal ring and tighten to 20 Nm.
Slide the oil screen [8] into the guides in the oil pump housing with the TOP mark facing
8
up. Make sure the form ring is in place and mount the cap [9]. Tighten the screws to
9
10 Nm.