»
MAINTENANCE WORK ON CHASSIS AND ENGINE
78
Remove the 3 screws [1], lift the tank approx. 15 mm and carefully tilt to the side. Disconnect
1
the fuel lines, disconnect the connector for the fuel pump and the pickup cable (fuel level)
and set down the tank.
1
1
Remove the lower screw [2] on the right tank. Remove the HH screws and take off the bat-
tery cover [3].
3
2
Remove the drain plug [4] on the oil tank and allow the oil to drain into a receptacle. Remove
6
the screws [5] and tilt the oil return valve [6] to the side.
5
4
5