Konica Minolta CF2002 Setup Instructions page 33

11. Preparing for Installation of the Controller
Before installing the controller, make the following settings.
I I I I Selecting the "Printer" Setting
Use the External Panel Controller to change the "Priority Device" setting to "Printer".
[Default setting: Copier]
1. Press the [Utility] key on the External Panel Controller.
2. Click [1/2] on the User' Choice: 2 screen.
3. Click [Printer] for the "Priority Device" setting.
I I I I Specifying the Administrator Access Code
Use the "Tech. Rep. Mode" of the External Panel Controller to specify the administrator
access code, and then inform the customer of the specified access code.
NOTE
The access code is required in order to log into the Administrator mode of PageScope
Light.
[Default setting: 0000]
I I I I Specifying the Peripheral Setting
Change the Peripheral setting for the External Panel Controller to "Controller 2".
[Default setting: Without Controller]
1. Enter the Tech. Rep. Mode of the External Panel Controller.
2. Click [Peripheral Setting] of the System Input.
3. Click [Controller 2].
4. Set the power switch of the printer to "O".
5. Remove the servicing equipment.
4581-7777-01
Printer Panel 1
C4581P017CA
– 32 –