IBM BladeCenter S Installation And User Manual page 27

Activity LED
Power-on LED
Release handle
The BladeCenter S chassis supports a single advanced management module, and it
must be installed in the advanced management module bay.
Advanced management module indicators and controls:
The advanced management module has several LEDs that you can use to obtain
status about the advanced management module and the Ethernet connection.
Power-on
LED
Release handle
The following advanced management module LEDs provide status information
about the advanced management module and Ethernet connection:
Error LED
OK
Serial
Console
Video
Port link LED
Ethernet
LINK
TX/RX
Port activity LED
USB
MAC
address
Activity
Error
LED
LED
OK
LINK
TX/RX
Reset
Port link LED
Port activity LED
Chapter 1. Introduction
15