IBM Netfinity User Manual page 33

You can load only one intermediate driver at a time. This means that advanced
options, such as Failover Teaming and VLANs, can be configured for either Netfinity
Gigabit Ethernet Adapters or a standalone LOM, but not both.
If you click Yes in the above dialog box, a LOM can be configured only as a member
of a Failover Team, but not as a member of a VLAN. If you click No, the LOM will
not be used as part of a Failover Team.
Note: VLANs are not supported for LANs on a motherboard (LOM). If a LOM is a
member of a Failover Team, VLANs will not be supported for that team.
5. In the Netfinity Gigabit Ethernet Adapter device driver properties window, click the
VLAN Configuration tab.
• If there are no VLANs or Failover Teams currently configured, the following
window opens:
Click Yes to continue configuration.
• If you have not configured Failover Teams, the following window opens:
If the above window opens, you need to configure at least one Failover Team
before you can configure VLANs. For more information, see "Failover
Teaming" on page 1-14.
1-21
User's guide