Table of Contents
Advertisement
9. In the Network window, click Close.
10. When prompted to restart your computer, click Yes.
Your computer restarts, using the new configuration settings.
Note: If you modify any optional configuration parameters (Failover Team or
VLAN), you must restart your computer before the changes will take effect. If
you make changes and do not restart, you might experience configuration
problems. If no configuration changes have been made, you can click No to
close the configuration session without restarting your computer.
Deleting a VLAN
Adapters that are part of a Failover Team inherit all the basic configuration properties of
the team, including VLANs associated with the team. If you delete a Failover Team, any
VLANs configured for that team are also deleted.
To delete a configured VLAN, do the following from the VLAN Configuration tab:
1. Select the adapter that has the VLAN you want to delete. The adapter is highlighted
when your selection is made.
2. Select the VLAN you want to delete and click Delete VLAN.
The selected VLAN is deleted from the screen.
3. When you are finished configuring VLANs, click Close in the Netfinity Gigabit
Ethernet Adapter Device Driver Properties window to accept the changes.
If there are no VLANs or Failover Teams currently configured, the following window
opens:
If the window shown above opens, click Yes or No to complete the adapter
configuration.
4. In the Network window, click Close.
5. When you are prompted to restart your computer, click Yes.
Your computer restarts, using the new configuration settings.
Note: If you modify any optional configuration parameters (Failover Team or
VLAN), you must restart your computer before the changes will take effect. If
you make changes and do not restart, you might experience configuration
problems. If no configuration changes have been made, you can click No to
close the configuration session without restarting your computer.
1-23
User's guide
Advertisement
Table of Contents
