Startup And Shutdown - HIKVISION DS-7600NI-P Quick Start Manual

2. Connection
PC
PC
Alarm
Output
IP Dome
NOTE: DS-7600NI-SE/P Series NVR supports only IP cameras.

3. Startup and Shutdown

To Startup Your NVR:
1. Plug power cord into NVR and electrical outlet. It is HIGHLY recommended to use a surge
protector. The Power indicator LED on the front panel will turn yellow.
2. Connect a VGA or HDMI monitor and mouse into the NVR. NOTE: Monitor and mouse
need to be plugged in before starting.
3. Switch the POWER button on the back rear panel. The Power indicator LED will turn yellow.
The unit will begin to start.
NOTE: Each HDD will start separately to conserve power
NOTE: Default password is 12345
Internet
Router
Ethernet
Alarm
Input
IP Camera
Analog Dome Analog Camera
First Choice For Security Professionals
VGA Monitor HDMI Monitor
IP Dome IP Camera
Speaker
USB Mouse Keyboard IR Remote
Audio Input USB Device
www.hikvisionusa.com