Roland Duo-Capture UA-11 Owner's Manual page 31

3. Double-click the DUO-CAPTURE icon .
The "DUO-CAPTURE Driver Settings" dialog box will appear.
1
2
3
4
5
6
No . Setting
1
Audio Buffer Size
2
ASIO Buffer Size
[Use Smaller ASIO
3
Buffer Size]
[Use ASIO Direct
4
Monitor]
5
[Show "README"]
6 Driver Information
Description
You can adjust the input and output audio buffer size.
Decrease the buffer size to decrease latency. Increase the buffer size if audio
drops out.
After adjusting the buffer size, make sure to restart all programs that are using
the DUO-CAPTURE. If using software that has an "audio device test" function,
run the test function.
Specifies the minimum buffer size that can be set when using ASIO-compatible
software.
Depending on the software you are using, the buffer size displayed here may
differ from the actual buffer size.
For details about setting the buffer size, refer to the documentation for the
software you are using.
You can decrease the buffer size that can be set in the ASIO-compatible
software by selecting this check box.
Select the check box when playing a software synthesizer in real time or when
monitoring audio that is being input to DAW software in real time. Clear the
check box if audio drops out.
Before adjusting "Audio Buffer Size, " clear this check box.
To use the ASIO Direct Monitor function of ASIO-compatible software, select
this check box.
Displays the README file.
Displays the version of the driver that is currently installed.
Troubleshooting
31