Roland Duo-Capture UA-11 Owner's Manual page 18

Basic Use
NOTE
• The first-generation iPad cannot be used.
• The iPad app you're using must support CoreAUDIO.
You'll need to provide the following items
• iPad (made by the Apple Inc.)
• Apple iPad Camera Connection Kit (Camera Connector; made by the Apple Inc.)
• USB hub (commercially available; a type to which an AC adaptor or other power supply is
connected)
• USB cable (commercially available)
1
AC adaptor
included with the
USB hub
1. Power up your USB hub (connect the AC adaptor to the USB hub) .
2. Connect the USB hub to the iPad using the Camera Connector of the Apple iPad
Camera Connection Kit .
3. Set the DUO-CAPTURE's [COMPUTER/TAB] switch to the "TAB" position .
4. Connect the DUO-CAPTURE to the USB hub .
MEMO
Operation may be unstable if you use a USB hub of a type that does not have a connected power
supply, or if you connect the DUO-CAPTURE directly to the iPad.
18
USB hub that works with a
connected power supply
(commercially available)
4
3
Apple iPad Camera
Connection Kit
(Camera Connector)
Rear panel
Bottom panel
2