Roland Duo-Capture UA-11 Owner's Manual page 11

Windows 8/Windows 7/Windows Vista
9. When "Installation has been completed . " appears, click [Close] .
Close the "DUO-CAPTURE Driver Setup" dialog box.
10. Open the "Control Panel," click [Hardware and Sound], and then click [Sound] .
If you have selected Icon view or Classic view, double-click [Sound].
11. Click the [Playback] tab, select the DUO-CAPTURE's [OUT], and then click [Set
Default] .
12. Click [OK] .
If you cannot select the DUO-CAPTURE, refer to "Using the DUO-CAPTURE" (p. 20).
If the DUO-CAPTURE is selected as the output device, the computer's audio alerts will be played
using the DUO-CAPTURE; they will not be heard from the computer's speakers.
To open the Control Panel
1. On the Start screen, click the Desktop .
2. Move the mouse pointer to the upper right or lower right corner of the screen
to display the charms .
* On touch-enabled PCs, swipe from the right side of the screen to display the charms .
3. Click [Settings] and display the "Settings charms . "
4. In "Settings charms," click [Control Panel] to open the "Control Panel . "
Windows 8
Driver Installation
Proceed to p. 14
11