Synology DiskStation User Manual page 63

5 Click OK.
Note:
 When you encounter privilege conflicts, the privilege priority is as follows:
 When you create a new shared folder, if the access privilege of admin (or a user belonging to the administrators
group) to the folder is set as
be able to see the folder by going to
To allow Linux clients to access a shared folder:
1 Select the shared folder you want to edit from the shared folder list, click
Privileges.
2 Click Create to open the settings window.
3 Enter a Hostname or
 Single Host: The FQDN (fully qualified domain name) or an IP address.
 Wildcards: *,* .synology.com
 IP networks: 203.74.205.32/255.255.252.0, /24
4 Assign Privilege, assign
5 Click OK.
Asynchronous: NFS servers will reply to requests before the changes on the file are completed.
Allow Domain Users or Groups to Access Shared Folders
If you have joined your DiskStation to a directory service as a Windows domain or LDAP client, you can go to
Main Menu > Control Panel
Group to set up and modify the shared folder privileges of a domain/LDAP user or group.
To manage domain/LDAP users or groups' shared folder privileges:
1 Select the user or group you want to edit, and then click Edit.
2 Tick the checkboxes to manage the shared folder privileges. If you are editing the shared folder privileges of a
user, you can see the user's actual privilege under the
Note: In the event of privilege conflicts, the privilege priority will be: No access (NA) > Read/Write (RW) > Read
only (RO).
3 Click OK.
Encrypt a Shared Folder
Go to Main Menu > Control Panel
The AES 256-bit encryption can block off all unauthorized access attempts. Without the encryption key, other
people will not be able to use the encrypted data even if they remove the hard drives from your Synology
DiskStation and mount it on their device.
To encrypt a shared folder:
1 Select a shared folder you want to encrypt, and then click
2 Tick Encrypt this shared
again in the Confirm key
3 Choose the size of the AES encryption key from the
4 Tick Mount automatically on startup
starts up next time. By default, encrypted shared folder will be unmounted automatically on startup for security
reasons.
---------
1
Shared folder encryption is supported on specific models only.
63 Chapter 7: Set Up File Sharing
No access, then admin (or the user belonging to the administrators group) will only
Main Menu > Control Panel
IP. You may specify a host in three ways:
Root Squash, or tick Enable
Term Explanation
> Directory Service > LDAP
> Shared Folder
folder, enter the encryption key in the
field.
to mount the encrypted folder automatically after Synology DiskStation
Synology DiskStation User's Guide
No access
> Shared Folder.
Privileges
asynchronous, and click OK.
User, LDAP Group, Domain
Preview column.
to encrypt your shared folder.
Edit to open the settings window.
Encryption key
Encryption key size (bit) drop-down menu.
Based on DSM 4.1
> Read/Write > Read only.
and choose NFS
users, or Domain
1
field, and enter the same key