Chapter 3. Using The Projector With A Video Device - IBM iLC300 User Manual

Chapter 3. Using the projector with a video device

This chapter explains how to connect a video device to the projector and display
video images.
Standard video connections
1. Plug the video cable's yellow connector into the video-out connector on the
2. Plug the other yellow connector into the yellow Video connector on the
3. Plug a white connector into the left audio out connector on the video device.
4. Plug a red connector into the right audio out connector on the video device.
5. Plug the remaining white connector into the left audio in connector on the
6. Plug the red connector into the right audio in connector on the projector.
7. Connect the black power cable to the connector on the back of the projector
Note: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a round, four-prong S-video connector, plug an S-video
cable (sold separately) into the S-video connector on the video device and into the
S-video connector on the projector. Use the video cable's audio connectors as
© Copyright IBM Corp. 2003
video device.
projector.
projector.
and to your electrical outlet. The Power LED on the keypad turns solid.
video
R
Y
audio in
computer 1 computer 2 computer 2
s-video
R
Pr
audio in audio in
audio in
L
computer in
audio out
L
Pb
video
R
Y
audio in
computer 1 computer 2 computer 2 monitor
s-video
network
R
Pr
audio in
audio in
L
computer in
audio out serial control
L
Pb
monitor
network
serial control
9