IBM iLC300 User Manual page 38

28
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User's Guide
Problem
Edges of image distorted
Image not sharp
Image does not fit 16:9 screen
Image upside down
Image reversed
Video image "torn" or fragmented
Projected colors do not match source
Lamp won't turn on; LED blinking red
Image not centered on screen
Solution
Turn overscan on in the Picture ->
Advanced menu.
Adjust sharpness in the Picture ->
Advanced menu.
Change aspect ratio to 16:9 in the Picture ->
Aspect Ratio menu.
Turn off Ceiling in Settings -> System
menu.
Turn off Rear in Settings -> System menu.
Change Video Standard in Picture ->
Advance menu.
Adjust color, tint, color temperature,
brightness, and/or contrast in the menus.
v Make sure vents are not blocked; allow
projector to cool for one minute, or
v Replace lamp (see "Replacing the
projection lamp" on page 25).
v Move projector; adjust zoom and/or
height, or
v Adjust horizontal or vertical position in
the Picture -> Advanced menu.