Reloop Instruction Manual page 22

2. FIRTST STEPS / ASIO dRIVER INSTALLATION
Please insert the enclosed installation CD in your drive. In the ASIO drivers file select the driver
corresponding to your system and install it.
1. The language-selection window will open.
2. After having selected your language the installation options will be displayed. Select „Install the driver".
3. Now you will be asked to connect the Digital Jockey 2 Master Edition to your system. Connect the
mains adapter to the corresponding connector -B42- on the device's rear side. Turn on the device
via the On/Off Button -B43-. Now connect the enclosed USB cord to the controller and a free USB
port of your computer.
4. Now a message will appear displaying that the driver was successfully installed and a re-boot is
not necessary.
22