Table of Contents
Advertisement
ADVANTAGES OF A PURE SINE-WAVE INVERTER OVER A
The output voltage of a sine-wave inverter has a sine wave-form like the sine wave-
form of the mains / utility voltage. In a sine wave, the voltage rises and falls smoothly
with a smoothly changing phase angle and also changes its polarity instantly when
it crosses 0 Volts. In a modified sine wave, the voltage rises and falls abruptly, the
phase angle also changes abruptly and it sits at 0 Volts for some time before changing
its polarity. Thus, any device that uses a control circuitry that senses the phase (for
voltage / speed control) or instantaneous zero voltage crossing (for timing control)
will not work properly from a voltage that has a modified sine wave-form.
Also, as the modified sine wave is a form of square wave, it is comprised of multiple
sine waves of odd harmonics (multiples) of the fundamental frequency of the
modified sine wave. For example, a 60 Hz modified sine wave will consist of sine
waves with odd harmonic frequencies of 3rd (180 Hz), 5
and so on. The high frequency harmonic content in a modified sine wave produces
enhanced radio interference, higher heating effect in motors / microwaves and
produces overloading due to lowering of the impedance of low frequency filter
capacitors / power factor improvement capacitors.
Advantages of sine-wave inverters:
•
The output wave-form is a sine-wave with very low harmonic distortion and
clean power like utility supplied electricity
•
Inductive loads like microwaves and motors run faster, quieter and cooler
•
Reduces audible and electrical noise in fans, fluorescent lights, audio
amplifiers, TV, fax and answering machines
•
Prevents crashes in computers, weird print outs and glitches in monitors
Some examples of devices that may not work properly with modified sine wave and
may also get damaged are given below:
•
Laser printers, photocopiers, magneto-optical hard drives
•
The built-in clocks in devices such as clock radios, alarm clocks, coffee
makers, bread-makers, VCR, microwave ovens etc may not keep time
correctly
•
Output voltage control devices like dimmers, ceiling fan / motor speed
control may not work properly (dimming / speed control may not function)
•
Sewing machines with speed / microprocessor control
•
Transformer-less capacitive input powered devices like (i) Razors, flashlights,
night-lights, smoke detectors etc (ii) Re-chargers for battery packs used
in hand power tools. These may get damaged. Please check with the
manufacturer of these types of devices for suitability
•
Devices that use radio frequency signals carried by the AC distribution wiring
•
Some new furnaces with microprocessor control / Oil burner primary controls
•
High intensity discharge (HID) lamps like Metal Halide lamps. These may get
damaged. Please check with the manufacturer of these types of devices for
suitability
•
Some fluorescent lamps / light fixtures that have power factor correction
capacitors. The inverter may shut down indicating overload
MODIFIED SINE-WAVE INVERTER
th
Page 8
(300 Hz.), 7th (420 Hz.)
Advertisement
Table of Contents
