Setting The Dmx Address; Control Panel Functions - Iluminarc 36X3 User Manual

Setting the DMX address

Each fixture requires a "start address" from 1 to 512. A fixture requiring one or more channels for
control begins to read the data on the channel indicated by the start address. For example, a fixture
that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would
read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the
channels used do not overlap and note the start address selected for future reference. The Ilumipanel
36X3 IP Optic RGB uses up to 12 channels of DMX. If this is your first time using DMX, we
recommend reading the DMX Primer in the Appendix Section.

Control Panel Functions

All fixture functions and settings are accessible via the built-in control panel interface.
B
UTTON
MENU
SET
UP
DOWN
Ilumipanel 36X3 IP Optic RGB User Manual
MENU
SET
F
UNCTION
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the
selected function
Navigates upwards through the menu list and increases the numeric value when in a
function
Navigates downwards through the menu list and decreases the numeric value when
in a function
15
UP
DOWN
2009-05-21 11:44 AM