Using Pause, Stop, And Flash For Outside Auto Dial Buttons - AT&T MERLIN 3070 Administration Manual

PROGRAMMING CODES FOR CUSTOM FEATURES
Custom
Feature
Intercom Auto Dial
Outside Auto Dial
Primary Cover
Secondary Cover
Loudspeaker Paging
Page Zone 1
Page Zone 2
Page Zone 3

USING PAUSE, STOP, AND FLASH FOR OUTSIDE AUTO DIAL BUTTONS

An Outside Auto Dial button can store up to sixteen digits. For some types of calls,
though, you need to program an automatic pause, stop, or switchhook flash with the
number. For example, if your MERLIN system will be working in combination with
a PBX system where you have to dial 9 to get an outside line, you must program
a pause after the 9 on your MERLIN system Outside Auto Dial button. Or, when
you dial an additional long distance service sequence or call in a credit card authoriza-
tion code, you need to program an automatic stop.
Follow these steps to program a pause for PBX systems:
1. Label the button.
2. Set the voice terminal to program mode by following the boxed instructions on
page 30.
3. Touch the button you want for Outside Auto Dial.
4. Dial 90.
5. Dial 9.
6. Touch Hold (pause) to program the 1.5-second pause.
7. Dial the outside number you want the button to represent.
8. Slide the T/P switch to the center position to return to normal operation.
34
Dial This
Information Button Label
6 + lnter- Person's Name
com Code
90 + out- Person's Name or Telephone
Number
side Number
(16-digit max-
mum)
4 + lnter-
Person's Name or Location
com Code
5 + lnter- Person's Name or Location
com Code
680
Page All
681
Page Zone 1
682
Page Zone 2
683
Page Zone 3
Suggested