Getting Started; Unpacking; Connecting The Handle To The Trimmer Head - Eckman HDT01 Owner's Manual

2. Be aware of extension cord while operating Trimmer. Be careful not to trip over extension
cord. Keep extension cord away from cutter blades at all times.
3. Avoid Unintentional Starting —Do not carry plugged-in Trimmer with finger on switch.
Be sure switch is OFF when plugging in Trimmer.
4. Do Not Over-reach-------Keep proper footing and balance at all times.
DANGER----RISK OF INJURY
Keep hands away from blades at all times. Keep both hands on
handle areas when Trimmer is on. Do not attempt to remove cut
material or hold material to be cut when blades are moving. Do not
grasp the exposed cutting blades or cutting edges when picking up
or holding the Trimmer.
CAUTION----Blades coast after switching off.
5. Disconnect Trimmer----Disconnect the Trimmer from the power supply
When not in use
Before servicing
When changing accessories such as blades
When clearing jammed material from blades
When moving from one worksite to another
Do Not Force Trimmer—It will do the job better and with less likelihood of a risk of injury.
6. Do Not Abuse Power Cable --- Never carry Trimmer by power cable or yank it to disconnect from
the mains power supply . Keep power cable away from heat, oil, and sharp edges
7. Before starting Trimmer, make sure blades are not touching anything.
IV. GETTING STARTED

UNPACKING

1. Remove Trimmer and all other items from box.
2. Check all items for possible transit damage. If you find any damage or any parts are missing
call the Eckman Helpline.
Connecting The Handle To The Trimmer Head : Please see PIC 1
PIC.1
Any questions or problems – please call the Eckman Helpline on 0871 590 5917 or go to
www.eckman.co.uk
PIC.2
5