Note: Since server 0 was selected for the extent pool, only even LSS numbers are
selectable, as shown in Figure 9-44.
You can give the volume a unique name and number that may help you manage the volumes,
as shown in Figure 9-45.
Figure 9-45 View of the Create volume nicknames panel
Click Finish to end the process of creating the volumes.
9.3.7 Creating volume groups
Under Simulated Manager → Open Systems , perform the following steps to configure the
volume groups:
1. Click Volume Groups.
2. Click Create .
3. Click Go .
Fill in the appropriate information as directed in the panel menu. You will have to specify the
host type as shown in Figure 9-46 on page 188.
Chapter 9. The DS Storage Manager: Logical configuration
187