IBM TotalStorage DS6000 Series Redbooks page 292

MCECEBC
In this panel we overtype the SMS volume status with the desired status change. This shows
in the following panel, shown in Example 13-9.
Example 13-9 Indicate SMS volume status change for all connected system images
SMS VOLUME STATUS ALTER
Command ===>
SCDS Name . . . . . . : SYS1.DFSMS.SCDS
Storage Group Name . : XC
Volume Serial Numbers : XC6510 - XC6514
To ALTER SMS Volume Status, Specify:
System/Sys
Group Name
----------
MCECEBC
After pressing Enter and PF3 to validate and perform the SMS volume status change, a
validation panel confirms that the requested change did happen. This is displayed in
Example 13-10.
Example 13-10 Confirmation about SMS volume status change
STORAGE GROUP VOLUME SELECTION
Command ===>
CDS Name . . . . . : SYS1.DFSMS.SCDS
Storage Group Name : XC
Storage Group Type : POOL
Select One of the following Options:
3 1. Display - Display SMS Volume Statuses (Pool & Copy Pool Backup only)
2. Define - Add Volumes to Volume Serial Number List
3. Alter
4. Delete - Delete Volumes from Volume Serial Number List
Specify a Single Volume (in Prefix), or Range of Volumes:
Prefix
______ ______ ______ _____
===> XC
===>
===>
268
DS6000 Series: Concepts and Architecture
===> ENABLE MZBCVS2
===>
===>
===>
===>
===>
===>
===>
SMS Vol System/Sys
Status Group Name
------- ----------
===> disnew MZBCVS2
===>
===>
===>
===>
===>
===>
===>
ALL VOLUMES ALTERED
- Alter Volume Statuses (Pool & Copy Pool Backup only)
From To Suffix Type
6510 6514
===> ENABLE DISALL, DISNEW,
===> QUIALL, QUINEW )
===>
===> * SYS GROUP = sysplex
===> minus systems in the
===> sysplex explicitly
===> defined in the SCDS
===>
Page 1 of 2
SMS Vol ( Possible SMS Vol
Status Status for each:
------- NOTCON, ENABLE,
===> disnew DISALL, DISNEW,
===> QUIALL, QUINEW )
===>
===> * SYS GROUP = sysplex
===> minus systems in the
===> sysplex explicitly
===> defined in the SCDS
===>
_
X