Configuring The Logical Host Systems - IBM TotalStorage DS6000 Series Redbooks

Follow the steps specified on the panel shown in Figure 9-27. The next panel, shown in
Figure 9-28, requires you to enter the storage type details.
Figure 9-28 Specify the I/O adapter configuration panel
Enter the appropriate information and click OK .

9.3.3 Configuring the logical host systems

To create a logical host for the storage unit that you just created, click Host Systems, as
shown in Figure 9-29. You may want to expand the work area.
Figure 9-29 View of create Host systems
You can expand the view by clicking on the left arrow in the My Work area as shown in
Figure 9-29; the expanded view is shown in Figure 9-30.
176
DS6000 Series: Concepts and Architecture
Expand the Work area
Host Systems