TOTALINE P374-1800 Owner's Manual page 52

Viewing the UV Light Run-Time Viewing the UV Light Run-Time
After the UV light has been operating for the number of days set in
step #13 below, the Service UV Light icon will appear. This counter
keeps track of the number of days since the UV light icon was last
reset.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
11
Counts the number of days
Press
since the UV Light was last
reset. Press FAN to reset
the Service UV Light counter
and remove the icon from the
FAN
display.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
I3
0
Setup
Service
UV Light
Page 11.3
TOTALINE
MODE
MODE
Press
PROGRAM