TOTALINE P374-1800 Owner's Manual page 33

The copy command becomes available after
programming the entire previous day.
Yes
6
Select Yes to copy the
previous day's program
to this day displayed.
No
If Yes is selected:
Selecting Yes, then pressing mode will copy the
previous day's program. If yes is selected again,
Press
or each time, this routine will repeat.
MODE
If No is selected, as in previous steps, flashing prompts for input will appear for
the four time periods for the next day.
Press
After programming for all seven days is complete, press the PROGRAM button to
PROGRAM
leave the Setup screens. If no buttons are pressed, the display will leave the setup
screens after 30 seconds.
TOTALINE
Tu
Page 6.5
If No is selected:
Press
MODE