Administrator Operations
3
Touch [Management Data Encryption Key].
4
Enter the new 20-digit Management Data Encryption Key from the key-
board and keypad.
–
Press the [C] key to clear all characters.
–
Touch [Delete] to delete the last character entered.
–
Touch [Shift] to show the upper case/symbol screen.
–
Touch [Cancel] to go back to the HDD Setting screen.
5
Touch [OK].
What happens if the Management Data Encryption Key entered
?
does not meet the requirements of the Password Rules?
% If the Management Data Encryption Key entered does not comply
with the Password Rules, a message appears that tells that the
Management Data Encryption Key entered cannot be used. Enter
the correct Management Data Encryption Key. For details of Pass-
word Rules, see "Password Rules" on page 1-11.
% To change the Management Data Encryption Key, see "Changing
the Management Data Encryption Key" on page 2-73.
750/600
2
2-65