Konica Minolta bizhub 750 Security Manual page 29

2
Setting the Enhanced Security mode to [ON] changes the setting values of
the following functions.
Function Name
Password Rules
Prohibit Function When
Auth. Error
Public User Access
User Name List
Registering and Chang-
ing Addresses
Print Without Authenti-
cation
User Box Admin. Setting
Temporary Data Over-
write Setting
SSL
FTP Server
SNMPv1/v2c
SNMP v3 Security Level
and auth/priv-password
Print Data Capture
Network Setting Clear
Incorrect User Box No.
Entry
Reminder
When Password Rules is set to [ON], the characters and the number of
digits used for each password are restricted. For details of Password
Rules, see "Password Rules" on page 1-11.
2-10
Factory Setting When Enhanced Security mode is set to [ON]
OFF ON (not to be changed)
Mode 1 Mode 2 (not to be changed)
Three times is set.
* In association with Secure Document Access
Method, the method is changed from authenti-
cation using Secure Document ID and pass-
word (Mode 1) to that using the password with
the secure document first narrowed down by
Secure Document ID (Mode 2).
Allow Restrict (not to be changed)
ON OFF (not to be changed)
Allow Restrict (not to be changed)
Restrict Restrict (not to be changed)
Allow Restrict (not to be changed)
OFF Mode 1 (Mode can be changed, but the function
cannot be changed to OFF)
OFF ON (not to be changed)
ON OFF (not to be changed)
Read/Write en- Only Read is enabled (not to be changed)
abled
auth/priv-pass- The security level can be selected from among
word [auth-password] and [auth/priv-password].
An 8-digit-or-more auth-password and priv-
password can both be set.
Allow Restrict (not to be changed)
Enabled Restrict
Print Show Error Message (Print can be changed, but
the function cannot be changed to Auto Create
User Box)
Administrator Operations
750/600