Konica Minolta bizhub 750 Security Manual page 161

3
4
Enter the User Box No. and User Box Password of the target User Box
and click [OK].
What if there is a mismatch between the User Box No. and the User
?
Box Password?
% If there is a mismatch between the User Box No. and the User Box
Password, a message appears that tells that authentication has not
been successful. Click [OK] and perform step 3 once again.
% If the Enhanced Security mode is set to [ON], entry of a wrong User
Box Password is counted as unauthorized access. If a wrong User
Box Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine or more, a
message appears that tells that authentication has not been suc-
cessful for any subsequent operation for authentication. The ma-
chine is then set into an access lock state, rejecting any more logon
attempts. To cancel the access lock state, the Administrator of the
machine must perform the Release Setting. Contact the Adminis-
trator of the machine.
3-42
User Operations
750/600