installation
ADjUST ThE PANNINg AND TIlTINg whIlE wATChINg ThE MONITOR
Pan Base
1) You can adjust the camera to point in any direction by using the pan, Tilt, Rotate mechanism.
• Pan Base can rotates by +118°~ -231°(total 349°)
• Tilt Base covers 90˚ angle(0°~90°)。
• Rotate Base moves by +120°~ -218°(total 338°)
2) Methods of adjustment
• The case of wall installation
1
After mounting the camera on a wall, adjusting the panning angle so that the camera can face the direction
to monitor when tilted.
2
Adjust the tilting angle by rotating the tilt base.
3
Loosen the rotate base hold screw and adjust rotate base for the best view.
Tighten the rotate base hold screw.
4
• The case of ceiling installation
1
After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing position by
rotating the pan base.
2
Adjust the tilting angle by rotating the tilt base.
Loosen the rotate base hold screw and adjust rotate base for the best view.
3
4
Tighten the rotate base hold screw.
14_ installation
118˚
218˚
120˚
90˚
231˚
Rotate Base
Tilt Base